PVC membrane reinforced with fiberglass, with a fleece backing of laminated geotextile.
  • High puncture resistance
  • Installation is easy
  • High strength
  • Warranty from 10 years and more
  • Site visits by TechnoNICOL engineers, inspection, designer supervision, and supervision of installation
  • A wide range of components


A polymer roofing membrane based on a foundation of high-quality plasticized polyvinylchloride (PVC). It is stabilized against UV radiation through use of the TRI-P® system. Contains fire-retardants and special stabilizers. It has enhanced elasticity for easy installation at low temperature.

Area of application

LOGICROOF V-GR FB (Fleece Back) PVC membrane is used for waterproofing single-layer roofing systems using the adhesive method: the seams of the membrane are welded with hot air using automated equipment. Thanks to a layer of laminated geotextile, the membrane can be pasted on various types of surfaces, such as concrete, metal, PIR insulating panels, and bitumen roll materials.


Colors gray
Reinforcement Fiberglass mat
Thickness, mm 1.5; 1.8; 2
Strength at maximum stress, MPa 800
Specific elongation when broken, %, not less than 200
Water absorption by weight, %, no more than 0.6
Bend point on R=5 mm beam, °C -40
Resistance to static loading, 250 N x 24 hours 20
Flammability group G3


Each roll is supplied in a tight packaging of opaque polyethylene film, which protects it from contamination and UV exposure.

Membrane thickness, mm Width x length of a roll, m Number of rolls per pallet
1.5 20 x 2.1 18
1.8 15 x 2.1 18
2 15 x 2.1 18


The rolls of PM should be stored on pallets, sorted by type, in a dry room or under an awning, in a horizontal position, no more than two layers of rolls high and at a distance of at least 1 m from any heating appliances.

Pallets with PM can be temporarily stored (for a period of no longer than 5 days) three rows high, provided the weight of the upper pallets is evenly distributed over all the rolls of the bottom rows using wooden boards or pallets.

Pallets with PM can be temporarily stored (for a period of no longer than 5 days) in the open air, in unopened, original packaging.

Guaranteed storage life of PM is 18 months from the date of manufacture.


Каталог объектов с клеевой системой ТН-КРОВЛЯ Эксперт PIR
Завод по производству вакцин Mechnikov S.A., Никарагуа
Жилой дом, фонд ЖКХ г. Рязань
Листовка "Контактный клей LOGICROOF Bond"


Other membranes

Back to the list